¥41,140
34GT-R純正ゲトラグ6速ミッション用(サーキットシフターガイドプレート)
焼き入れ処理してるので磨耗にも強いです。
ゲトラグミッションを下して2速から3速にシフトアップする時
に間違えて1速に入らない様にする部品を開発しました!
シフトミスして1速に入るとこうなります!いつかはエンジンが逝ってしまいます
1万回転回らないように開発したのがこのガイドプレートです、精度のいる赤丸のとこは何回もNCマシン加工で試作を沢山作り、一番スムーズに2速から3速に導く角度で
コンピューター機械加工してます。
注意!
純正のガイドプレートは販売中止で20万のトランスファーを丸ごと買わないと手に入ら
ないから純正加工はリスクが高いですよ失敗したら町乗りも出来なくなります
For 34GT-R genuine Getrag 6-speed mission (circuit shifter guide plate)
Because it is quenched, it is also resistant to abrasion.
When shifting up from 2nd gear to 3rd gear after releasing the Getrag mission
We have developed a part that prevents you from entering 1st gear by mistake!
This is what happens when you miss a shift and go into 1st gear! Someday the engine will die
This guide plate was developed so that it wouldn't turn 10,000 times.The part circled in red, which requires precision, was made many times by NC machine processing.
I do computer machining.
Note!
The genuine guide plate has been discontinued and can only be obtained by purchasing the entire 200,000 transfer.
Since there is no genuine processing, the risk is high. If you fail, you will not be able to ride in town.